DJI Zenmuse P1



The Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for photogrammetry flight missions, it takes efficiency and accuracy to a whole new level.

It’s full-frame sensor has more microns in each pixel, to give you higher image quality. At 45 mega pixels and with short shooting intervals, the camera captures high resolution images of large areas in shorter flights.

The P1 camera achieves absolute accuracy of 3 cm horizontal and 5 cm vertical (measured on flights with a GSD of 3 cm, flight speed of 15 m/s, 75% front overlap and 55% side overlap).


Sensor Size (Still): 35.9×24 mm (full frame)
Effective Pixels: 45MP
Pixel Size: 4.4 μm
Photo Size: 3:2 (8192 × 5460)
Minimum Photo Interval: 0.7 s
Mechanical Shutter Speed: 1/2000 – 1 s
Electronic Shutter Speed: 1/8000 – 1 s
Aperture Range: f/2.8-f/16
ISO Range (Photo and Video): 100-25600


Format: MP4
Resolution: 16:9 (up to 3840×2160)
Frame Rate: 60 fps


Stabilised System: 3-axis (tilt, roll, pan)
Angular Vibration Range: 0.01°
Mount: Detachable DJI SKYPORT
Controllable Range: Tilt -125° to +40°; Roll -55° to +55°; Pan ±320°


Dimensions: 198 × 166 × 129 mm
Weight: Approx. 800 g
IP Rating: IP4X
Power: 20 W
Operating Temperature Range: -20°C to 50°C


DJI Matrice 350 RTK
– DJI Matrice 300 RTK
– DJI DL 24mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 84°
– DJI DL 35mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 63.5°
– DJI DL 50mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 46.8°

Package Contents

– DJI Zenmuse P1 (Gimbal and Camera)
– DJI DL 35mm F2.8 LS ASPH Lens
– DJI Care Enterprise Basic (1 Year)
– SD and microSD Cards
– Hard Case
– Camera Body Cap
– Lens Rear Cap


DJI TB65 Intelligent Flight Battery

The DJI TB65 Intelligent Flight Battery is built for the DJI Matrice 300 series drones (300 and 350).

Delivers high-powered performance with efficient energy management and support for fast charging. The DJI Matrice 300 series drones (300 and 350) require two TB65 Intelligent Batteries per flight.


- Up to 55 minutes of flight time
- Supports up to 400 charge cycles
- Intelligent auto-heating and heat dissipation systems to maintain battery cell health
- Supports the hot-swap function (change batteries without powering off the aircraft)


- Capacity: 5880 mAh
- Voltage: 44.76 V
- Battery Type: Li-ion
- Energy: 263.2 Wh
- Net Weight: 1.35 kg
- Operating Temperature Range: -20° to 50°C


- DJI Matrice 350 RTK
- DJI Matrice 300 RTK
- DJI BS65 Intelligent Battery Station
- DJI BS60 Intelligent Battery Station

DJI BS65 Intelligent Battery Station

Make mission preparation easy with the DJI BS65 Intelligent Battery Station, a comprehensive, all-in-one battery charging and storage solution for TB60/TB65 Intelligent Flight Batteries. The battery station maximises charging efficiency and battery health while being easily transportable.

Provides storage and manages charging of up to 8 DJI TB60/TB65 Intelligent Flight Batteries and 4 DJI WB37 Intelligent Batteries.



- Supports storage and ready-to-fly charging modes
- 360° rotating wheels
- Charges two TB60/TB65 and one WB37 batteries at the same time



- Storage Capacity: 8 x DJI TB60/TB65 and 4 x DJI WB37 batteries
- Input: 100-120 VAC,50-60 Hz / 220-240 VAC,50-60 Hz
- Output Power: 750 W (100-120 VAC) / 992 W (220-240 VAC)
- Dimensions: 580 x 358 x 254 mm
- Net Weight: 9.03 kg
- Operating Temperature Range: -20° to 40°C


- DJI TB65 Intelligent Flight Battery
- DJI TB60 Intelligent Flight Battery

Package Contents

- DJI BS65 Intelligent Battery Station
- USB-C Cable
- AC Power Cable


Your Go-to Tool for Aerial Photogrammetry

Extraordinary Efficiency

The P1 includes a full-frame, low-noise high-sensitivity sensor that can take a photo every 0.7 seconds during the flight, and covering 3 km2 in a single flight (at a GSD of 3 cm, with an 75% front overlap rate and a 55% side overlap rate).

Remarkable Accuracy

The P1 camera is equipped with a global mechanical shutter, which has a shutter speed of 1/2000 – 1 s, and the all-new TimeSync 2.0 system.  This technology synchronises across modules at the microsecond level, and lets users capture centimetre-accurate data combined with the real-time position and orientation compensation technology.

Robust Versatility

Create 2D, 3D, and detailed models thanks to the integrated 3-axis gimbal that can be outfitted with 24/35/50mm lenses and the Smart Oblique Capture feature.

Smart Oblique Capture

The P1 can cover 7.5 km2[1] in one workday. Smart Oblique Capture automatically rotates the gimbal to take photos at different angles, so only photos essential to the reconstruction are taken at the edge of the flight area. This increases the efficiency of post processing by 20%[2] to 50%[3].

[1] Using Smart Oblique Capture at a GSD of 3 cm, with an 80% front overlap rate and a 60% side overlap rate.

[2] Area mapped: 1.5 km2, flight altitude: 200 m.

[3] Area mapped: 0.5 km2, flight altitude: 200 m

Smart Data Management

Mission result files are automatically associated with the Mission Name and Mission Time.

A centralised storage location for photos, GNSS data, and TimeStamps.MRK files.

The image metadata contains the camera’s intrinsic and extrinsic parameters and the status of RTK.

A Mission Mode for Any Scenario

2D Orthomosaic Mission

Generate orthomosaics without GCPs using the P1, perfect for medium to large-area operations.

3D Oblique Mission
Obtain images from multiple angles quickly and easily, meeting the 3D modelling requirements for various industries such as urban planning and cadastral surveys. These images can be used for 3D reality models and smart city planning.
Detailed Modeling Mission

Get high-resolution images of vertical or slanted surfaces from a safe distance that accurately captures small details, for use in reconstruction, geological surveys, conservation, engineering and more.

Application Scenarios

Topographic Mapping

Capture data that meet the 1:500 scale accuracy requirements without GCPs.

Cadastral Surveying

Quickly generate centimetre-level accurate 3D reality models.

AEC and Surveying

Manage the full project lifecycle with 2D and 3D drone data.

Natural Resource Management

Measure, classify, or determine the ownership of water bodies and forests.

Geological Investigation

Safely gather millimetre-level accurate aerial data of geological hazard sites.

Disaster Site Modeling

Gain real-time overviews of vast disaster-struck areas to help teams make critical decisions.

You may also like…