Emlid Dual Car Fast Charger

$55.00

Shipping in early April

Features

– Charges Emlid Reach receivers to 80% in 2.5 hours, to 100% in less than 3.5 hours
– Compatible with USB-C devices
– Smart integrated protection for devices
– Supports PD fast charging

Specification

Input: DC 10.8V(min) – 4A / DC 12-24V – 3.5A / DC 30V(max) – 1.5A
Output (both ports): 5V – 3A / 9V – 2.22A / 12V – 1.67A
Output power (both ports): 20W

PACKAGE CONTENTS

1 x Emlid Dual Car Fast Charger

Available on back-order

FREQUENTLY BOUGHT TOGETHER

Emlid Fast Charger USB-C Cable

Features

- USB-C – USB-C strong nylon braided cable
- Compatible with USB Type-C devices
- Supports PD fast charging

Compatible with:
- Emlid Reach RS3
- Emlid Reach RS2+/RS2
- Emlid Reach RX

Specification

Length: 1.2m
Current: up to 5A

PACKAGE CONTENTS

1 x Emlid Fast Charger USB-C Cable

Emlid Reach RS3

RS3 RTK GNSS RECEIVER WITH TILT COMPENSATION

The Emlid Reach RS3 is a multi-band RTK GNSS receiver that features IMU-based tilt compensation(1), an LTE Modem and dual-band radio for RTK corrections.

It offers centimetre-level accuracy even in hard-to-reach spots, compatibility with RTK base stations transmitting TRIMTALK(2) 450S, has a battery life of up to 22 hours and is engineered to be tough. The Emlid Flow mobile app enables you to control the RS3 receivers with iOS and Android devices.

Limited-time offer: Receive a complimentary 3-month Survey plan subscription in Emlid Flow.

IMU

6DOF, RTK + 2 mm + 0.3 mm/°

GNSS

GPS/QZSS, GLONASS L1, L2; BeiDou B1, B2; Galileo E1, E5

18 hrs with tilt compensation

Li-Ion battery, USB Type-C charging

LTE and Wi-Fi

To connect the device to the internet

Dual-band radio

868/915 MHz LoRa to receive and transmit corrections
450 MHz UHF to receive corrections

NTRIP and RTCM3

Supported protocols to send and receive corrections

(1) Tilt compensation requires the Emlid Flow or a compatible third-party app
(2) TRIMTALK is a trademark of Trimble Inc.

Package Contents

– Reach RS3
– Carrying case with a strap
– LoRa antenna
– USB Type-C cable
– Free Emlid Flow 3-Month Survey Plan Subscription

Emlid Reach RS2+

RS2+ RTK GNSS RECEIVER WITH LTE MODEM AND CENTIMETRE PRECISION

The latest RS2+ features an LTE Modem, dual diversity LTE antennas and a range of design improvements to deliver Emlid’s most user-friendly and durable GNSS receiver yet. The Reach RS2+ is a versatile GNSS receiver that can be used for surveying, mapping, and navigation. It offers centimetre-level accuracy in both RTK and PPK mode, has a battery life of up to 22 hours and is engineered to be tough.

The Emlid Flow mobile app enables you to control the RS2+ receivers with iOS and Android devices.

GNSS

GPS/QZSS L1C/A, L2C
GLONASS L1OF, L2OF
BeiDou B1I, B2I
Galileo E1-B/C, E5b

Positioning Accuracy

PPK
Horizontal 5mm + 0.5 ppm
Vertical 10mm + 1 ppm

RTK
Horizontal 7mm + 1 ppm
Vertical 14mm + 1 ppm

Connectivity

LoRa radio 868/915MHz (up to 8Km)
Built-in LTE modem (Nano-SIM)
Wi-Fi 802.11b/g/n
Bluetooth 4.0/2.1 EDR
Ports: RS-232, USB Type-C

Data

NTRIP and RTCM3 corrections
NMEA and LLH/XYZ position output
RINEX logs with update rate up to 20Hz
16GB internal storage

Package Contents

– Emlid Reach RS2+
– LoRa antenna
– USB cable
– Carrying case
Emlid Flow app (free download)