DJI RC Plus Remote Controller



The DJI RC Plus Remote Controller with a 7-inch large high-bright screen is designed for industry users and supports dual operator mode.


– 7” ultrabright touchscreen display for easy controls and navigation
– Fully sealed design with IP54 weather resistance
– 6 fully-customisable macro buttons for automating key functions
– Powerful 8-core high-performance processor
– 6 hour battery life with support for DJI WB38 battery (not included) hot-swaps
– Support for DJI Pilot 2 and DJI FlightHub 2


Max Transmission Distance: 15 km (FCC), 8 km (CE/SRRC/MIC)
Dimensions (antennas folded): 268 x 162.7 x 94.3 mm (L x W x H)
Resolution: 1920 x 1200 pixels
Maximum Brightness: 1,200 cd/m²
Internal Battery: Li-ion (6500 mAh @ 7.2 V)
Storage:64GB (support for expandable storage via microSD card)
GNSS: GPS/Galileo/BeiDou
Weight: Approximately 1.25 kg
Operating Temperature: -20 to 50 °C


DJI Matrice 350 RTK
– DJI Matrice 300 RTK(1)
– DJI Matrice 30 Series

Package Contents

– 1 x DJI RC Plus Remote Controller

(1) The DJI RC Plus Remote Controller can be paired with the DJI Matrice 300 RTK. However, please note:
– Older payloads such as the DJI Zenmuse XT2 and Z30 will not be supported
– The DJI RC Plus Remote Controller does not fit in the standard DJI Matrice 300 RTK hard case


DJI WB37 Intelligent Battery

This 2s 4920 mAh battery has excellent discharge performance at low temperatures and charges quickly. One battery offers four to five hours of operating time for a 7.85" DJI CrystalSky monitor, five to six hours for a 5.5" DJI CrystalSky monitor, and four hours for a DJI Cendence remote controller.



- Capacity: 4920 mAh
- Voltage: 7.6 V
- Battery Type: LiPo 2S
- Energy: 37.39 Wh
- Net Weight: 220 g


- DJI Matrice 350 RTK RC Plus Remote Controller
- DJI Matrice 300 RTK Smart Controller
- DJI Phantom 4 RTK Remote Controller
- DJI Phantom Multispectral Remote Controller
- DJI Cendence Remote Controller
- DJI CrystalSky Monitor

DJI Zenmuse L2


With a payload that combines the powers of both LiDAR and RGB data, the DJI Zenmuse L2 is a versatile mapping solution with a detection range of up to 450 metres (at 50% reflectivity and 0 klx).

The L2 integrates frame LiDAR, a self-developed high-accuracy IMU system, and a 4/3 CMOS RGB mapping camera, providing DJI flight platforms with more precise, efficient, and reliable geospatial data acquisition.

When used with the DJI Matrice 350 RTK (or the DJI Matrice 300 RTK(1)) and DJI Terra, the L2 unlocks enhanced 3D survey capabilities. This combination quickly creates true-colour point clouds and reality models. It efficiently captures the details of complex structures and delivers precisely reconstructed models, at a centimetre accurate level.


Detection Range (0 klx): 450 m @ 50% reflectivity
Detection Range (100 klx): 250 m @ 10% reflectivity
Point Cloud Rate (Single Return): 240,000 pts/s
Point Cloud Rate (Multiple Return): 1,200,000 pts/s
Pos. Accuracy @ 150 m: 5 cm (horiz.); 4 cm (vert.)
Ranging Accuracy (RMS 1σ): 2 cm @ 150 m
Maximum Returns Supported: 5
Scan Modes: Repetitive, Non-Repetitive
FOV (Repetitive Scan): 70°×3°
FOV (Non-Repetitive Scan): 70°×75°
Laser Spot Size: 4 cm (horiz.), 12 cm (vert.) @ 100 m (FWHM)

Inertial Navigation System

IMU Update Frequency: 200 Hz
Yaw Accuracy (RMS 1σ): 0.2° (real-time), 0.05° (post-processing)
Pitch/Roll Accuracy (RMS 1σ): 0.05° (real-time), 0.025° (post-processing)
Horizontal Positioning Accuracy: 1 cm + 1 ppm (RTK fix)
Vertical Positioning Accuracy: 1.5 cm + 1 ppm (RTK fix)

RGB Camera

Sensor Size: 4/3 CMOS
Effective Pixels: 20 MP
Mechanical Shutter Speed: 2-1/2000 s
Electronic Shutter Speed: 2-1/8000 s
Aperture Range: f/2.8-f/11
ISO Range: 100-6400


Dimensions: 155 × 128 × 176 mm
Weight: Approx. 905 ± 5 g
IP Rating: IP54
Power: Typical 28 W (Max 58 W)
Operating Temperature Range: -20°C to 50°C


- DJI Matrice 350 RTK
- DJI Matrice 300 RTK (DJI RC Plus required)

Package Contents

– DJI Zenmuse L2
- DJI Care Enterprise Basic (1 Year)
- MicroSD Card
– Hard Case